NEW

Everything you need to know about Manway Gaskets

When it comes to manway gaskets, we want to keep things simple, introducing them as the small sealing ring found in hatches/openings that are constructed for large tanks. Openings which give people access to the inside of the aforementioned tanks and vessels. The...

How Do You Recognise a Quality Gasket?

A gasket is a very simple item that is reasonably inexpensive. Considering how gaskets work, you may be facing a costly bill should a gasket fail. Choosing a quality gasket from Specialist Sealing Products helps to create a seal that will last until well after the...

5 Common Gasket Failures

Common Failure Causes  A blown head gasket in a vehicle is something that needs to be fixed promptly. If left untouched, you run the risk of seriously damaging your engine. Knowing what causes gasket failure or gasket problems is the key to gasket failure prevention,...

O-ring Size Guidelines

The performance of an O-ring seal depends largely on two factors— the right material and the right size. However, determining the right size O-ring is usually the hardest part when it comes to choosing the right O-ring for an application.   Unfortunately, selecting...

Tips for Proper O-Ring Installation

  An O-ring is a crucial component of a fluid system, and how it is installed can make or break that system. To ensure the success of an application, O-ring requires not only careful material selection and design but also proper installation procedures. A small...

Why Colour Matters When Choosing Gaskets?

Gasket manufacturers have turned to colour coding gaskets to make the selection and categorisation of the product more accessible.   It is possible to identify the winding and filler materials that were used for fabrication by the colouring of the outer top side of...

Materials that can be Used in Producing Gaskets

Seals and gaskets are meticulously manufactured to be able to withstand the exacting conditions under which they function. Not only does a gasket seal two distinct parts and allow the containment of extreme temperature fluids, steams and gases, but it must meld the...

Choosing the Perfect Gasket for Your Needs

The perfect gasket choice and fit is an essential component of engines, appliances, and industrial machinery projects. They are a fundamental part when engineering anything from power tools to oil drills. A high-quality manufacturer of gaskets and seals will use only...

Manufacturing of High-Quality Gaskets

A large number of engineering and machinery applications use gaskets. This mechanical seal is employed whenever gaps between two or more surfaces are joined together. This process is also required to prevent leakage and withstand the extremes of compression when...

O Ring Materials Selection

This is a quick overview of the various O-Ring materials that are available for applications and found at select UK O-Ring suppliers. When it comes to Specialist Sealing Products, it is a good idea to be clued into every option that is on the market. The materials can...

Sealing products for demanding industries by SSP

Order Precision Gaskets and Joints

If you’re in the market for precision gaskets and joints, Specialist Sealing Products (SSP) are the experts to turn to. We design and manufacture the highest quality seals with laser precision. If you’ve been looking for a state-of-the-art manufacturer with zero tolerance for error or guesswork, then your search is officially over. SSP is on the job.

Callback Request

Sealing Products

Welcome to Specialist Sealing Products, manufacturing and distribution of high quality
Seals, Gaskets and ‘O’ Rings for a wide range of applications, worldwide.

QUALITY SERVICE

SSP was established with the core principle of putting you first. We pride ourselves on exceeding your
requirements while providing competitive pricing on all of our sealing products.

Oil & Gas
Petro-chemical
Brewing
Pumps

A Wide Range of Products Manufactured in the UK

Our products do so much more than create an air- or water-tight seal. Take our spiral wound gaskets as an example. These combine a solid metal ring with a non-metal component (often graphite), which wind and seal together with spring-like tension.

They’re capable of maintaining a seal at both high and low temperatures – and they can be designed to deliver across a wide range of pressures. This is just one example of how intricately designed our seals are. From PTFE sheeting to Kammprofile seals, metal-clad to non-metallic – there’s a gasket or seal in our product range to suit every need and application.

We serve the world’s leading high-tech sectors throughout a wide range of industry

From aerospace engineering to offshore oil rigs our sealing products are used in some of the most demanding industries in the world.

We manufacture seals and metallic gaskets that are put to use in some of modern science’s most demanding fields. Our industry experience is second to none, and you’ll find our gaskets and joints at work in any and all of these advanced sectors:

  • Aerospace and defence projects
  • Oil and gas refineries
  • Petrochemical plants
  • Breweries

But you don’t have to represent a high-tech sector to benefit from our products. We also design and manufacture seals that are put to work in a wide range of more typical pump-and-valve setups. Our high-calibre gaskets are so affordable, that there’s simply no reason to settle for anything less than perfect.

Contact SSP to Place an Order

At SSP, we bring technical expertise, quality assurance and a tireless work ethic to every task we complete. We believe that our products are more than the sum of their specifications and

components. That’s why we strive to provide faultless customer service at every interaction with our clients. If you have any questions or would like to place an order, please request a callback or dial 01535 274 776

Metallic & Non-Metallic Gaskets Semi-Metallic and Spiral Wound Gaskets Soft Cut Gaskets and Sheeting Seal Jointing & Materials Elastomeric Seals & ‘O’ Rings

Callback Request