Our Latest News
Gasket vs Seal: What Is the Difference and Which Do You Need?
Let us start by saying: All gaskets are seals, but not all seals are gaskets. And yes, we know that they are very often grouped together and do indeed have similar functions; however, they are different, both in their characteristics and use. With...
Ring Type Joint vs Raised Face Flange: Key Differences and How to Choose
Within piping systems, valves, and vessels, it is critical that you choose the most appropriate flange, as these components affect safety, efficiency, and cost. Two of the most common flange face types include raised face and ring type joint flanges. These two...
Blind Flange vs Blank Flange: Key Differences and When to Use Each
Distinguishing between blind and blank flanges is a critical requirement for operational safety and efficiency within industrial applications such as pipe systems and networks. These two terms, blank and blind, are often used interchangeably; however, it is...
How Thick Should Gasket Paper Be?
Typical gasket paper thickness ranges from 0.15mm to 3.00mm, with many manufacturers following the principle that thickness follows flange condition and pressure. Choosing the correct gasket sheet thickness should be decided...
O Ring Colour Identification
Ensuring that tight seals are provided so no leaks occur and no contamination enters the application, correct o ring colour identification is essential. These essential components are primarily used within water and gas distribution, the food...
Choosing the right O-ring material for Hydraulic fluid applications
Choosing the appropriate O-ring material for hydraulic fluid is vital to prevent seal failure in applications and systems where leak prevention and contamination control are essential. Each material type has its own set of unique properties and will...
What you need to know about O Ring Lubricants
Choosing a compatible lubricant for a known O-ring material is essential to ensure the integrity and safety of the overall application/system. Enhancing an O-ring's performance, and as part of maintenance plans, lubricating is an essential element; however, with...
Flange corrosion protection: How to identify, inspect, and prevent flange damage
It’s essential in any application that uses gaskets and seals that the right materials are chosen. Ensuring compatibility not only provides peace of mind that leaks are prevented, but by ensuring the correct material, you can also help to prevent excessive corrosion....
